Classic
Switches proudly manufacture completely Australian Made Products |
|
|
|
SWITCHGEAR: |
Classic
Switches use only quality Australian Made Clipsal switchgear in the
manufacture of their switches and accessories |
|
|
CARE
& MAINTENANCE: |
Do not use Chemical
or Abrasive cleaners on the brass surfaces. The lacquered surface should
only be wiped with a soft cloth and we recommend the occasional application
of a pure non-abrasive polish such as Mr. Sheen. |
|
|
REPOLISHING
& RELAQUERING: |
Classic
Switches are happy to repolish and relacquer any covers for a small
fee or use the following D.I.Y. method of refinishing. 1: Remove covers from switches, they are legal and safe with the covers removed. It is not necessary to turn the power off. 2: Remove old lacquer with thinners or acetone applied with a soft cloth. 3: Repolish with a brass/metal polish. 4 : Apply a clear metal lacquer which is available in spray packs. |
|
|
ANTIQUE
BRASS: |
The solid brass
covers have been chemically darkened and then relieved so that the brass
shows through as brass highlights. |
|
|
FLORENTINE
BRONZE: |
The solid copper
covers have been chemically darkened and then relieved so that the brass
shows through as copper highlights. |
|
|
CHROME: |
The solid brass
covers have been chrome plated |
|
|
2 WAY & INTERMEDIATE SWITCHES: |
2 WAY
SWITCH = 1 Switch to 1 Light OR 2 Switches to 1 Light INTERMEDIATE = 3 Switches to 1 light Intermediate switches are used when 3 switches are required to control 1 light. To do this you need 2 x 2 WAY Switch and 1 x INTERMEDIATE Switch. |
|
|
DIMMERS
& FAN CONTROLS: |
The
variable speed Dimmers and Fan Controls require a switch to turn the mechanisms
on and off. Switched Dimmers do not require and on/off switch. The 3 speed Fan Controls do not require and on/off switch. For more Detailed Information Click HERE |
|
|
ELECTRICAL
APPROVALS: |
All
Classic Switches products carry Electricity Trust of South
Australia certificates of approval. |
|
|
MOUNTING
BLOCKS: |
Pine
mounting blocks are made from plantation timber. Cedar mounting blocks are now made from veneered MDF. The Classic Range now comes standard with pre-drilled mounting holes and mounting hardware to fix to standard wall boxes and plates. These blocks can also be supplied without any pre-drilled holes if required. |
|
|
LAMPS: |
Lamps
are cast aluminium. Powder coated lamps are pre treated for corrosion
before powder coating. Undercoated lamps are painted with an etch primer
supplying a good first coat suitable for the application of a top coat
of the customers choice. We recommend that the lamps be used under a verandah or in similar sheltered areas as they are not weather proof. |
|
|
FOR TECHNICAL SUPPORT ONLY: | Contact Pales In Style. Email: techsupport1@palesinstyle.com.au Phone: (07) 4630 1232 Outside Australia Phone: (61) (7) 4630 1232 |
© Copyright 2003-2017 Pales In Style. All rights reserved
|